Are you encountering the “UEFI Firmware settings not showing” problem? If your answer is YES, you are in the right place.
In the latest Windows computer, there is a firmware called UEFI Firmware that provides various advantages such as advanced security features, faster boot times, and support for larger hard drives.
Unfortunately, some Windows 10 users are experiencing issues while trying to access the UEFI Firmware settings and reported the “UEFI Firmware settings not showing” problem.
If you are facing the same problem and looking for a fix, look no further as we covered you.
In this guide, we will provide you with some effective troubleshooting methods to fix the “UEFI Firmware settings not showing” problem.
So, without any further ado let’s get started:
How to Fix the “UEFI Firmware Settings Not Showing” Problem
Here are some troubleshooting methods you can apply to fix the “UEFI Firmware settings not showing” problem.
Check For Compatibility
One of the major reasons why users can not see the UEFI Firmware settings is because their device motherboard does not support the UEFI.
So, you can start troubleshooting this problem by checking the device compatibility.
To check this you can run the MSINFO utility to find the BIOS Mode.
If you don’t know how to run the MSINFO utility use the following steps:
- First, press the Windows + R keys together to open up the Run prompt.
- Under the text box, type msinfo32 and hit Enter.
- This will open the System Information screen.
- Now, select the System Information.
- Then select System Summary.
- Scroll down to find BIOS Mode.
- If the BIOS Mode shows UEFI, then your computer supports UEFI firmware. If it is shown as Legacy, your computer does not support UEFI.
Disable Windows 10 Fast Startup
If you have a Fast Startup feature enabled in your Windows operating system then it will bypass the BIOS process that prevents the UEFI firmware settings from showing.
In that case, you can fix your problem, by disabling the Fast Startup option on your device.
To do so, use the following steps:
- Open the Run prompt by pressing the Windows + R keys together.
- Type “powercfg.cpl” in the text box and hit Enter.
- This will open the Power Options menu.
- On the Power Options window, click on Choose what the power buttons do.
- Here, go to the System Settings menu, and click on the Change settings that are currently unavailable option.
- Under the Shutdown settings, uncheck the box next to the Turn on fast startup (recommended) option.
- That’s it, save the changes and the Fast Startup feature is disabled.
Clear the CMOS
Some users have reported that they can fix the “UEFI Firmware settings not showing” problem by clearing the CMOS.
If disabling the Fast Startup does not fix the problem, you should consider clearing the CMOS.
If you don’t know how to do it, follow the steps below:
- Turn off your computer and remove all the cables and other devices connected to it.
- Next, disconnect the power cord and remove the computer cover.
- On the computer motherboard, find the CMOS battery.
- Use any non-conductive tool to remove the CMOS battery.
- Once removed, wait about 1–5 minutes before you put it back.
- Now plug the power cable and other devices into the computer and turn on the computer.
- Wait for the computer to boot and check if the problem is fixed.
The above-mentioned methods will fix your problem. If not then you can visit the experts and ask them to fix this problem in your computer.
That’s it, this is how you can fix the “UEFI Firmware settings not showing” problem.